 1”
Crushed Gravel is a
mixture of sand, rock fines and rock. Also called Road Crush, the same material
you would see on a grid road. This material is also used as packing gravel for
underneath asphalt, concrete, driveways, garage pads, retaining walls and
paving stones.
 2”
Crushed Gravel is a sand, rock fines and rock mixtures that is used for heavy
traffic areas with larger vehicles. ie:
lease roads.
 3”
Crushed Gravel is a sand, rock fines and rock mixture that is used for heavy
traffic areas with larger vehicles. ie:
new lease roads or for a base gravel for new construction.
 14mm
Concrete Rock is used
in mix designs that require smaller aggregate. This is used for block fill, exposed
concrete or stamped concrete.
 20mm
Concrete Rock is used
in standard mix designs for concrete. It is a clean fractured rock that also
can be used as a small landscaping rock.
 1
½” Weeping Tile Rock
is an unwashed, angular rock used for drainage rock or basement gravel. Being
unwashed, it still contains rock fines. Can be also used as RV pad rock or
landscaping rock. Often seen between houses as an extra
parking pad.
 Northern
Blend is used in
exposed concrete. It is made up of lots of black and white rock.
 1”
Screened Rock or Landscaping Rock
is a natural tan color with a smooth, round surface. It is ideal for use as
landscaping and it is also used for a drainage rock.
 1
– 4” Screened Rock is
a natural tan color with a smooth, round surface. It is ideal for use in
drainage, landscaping, ponds, and septic field systems.
 Concrete
Aggregate Mix is a
mixture of concrete sand and concrete rock. Add Portland cement to make your
own concrete.
 Premium
Blend Sand had been
screened, but is unwashed. It is used for street sanding and areas requiring
fill.
 Bedding
Sand is very find
sand for use in sandboxes, playgrounds and for backfilling for pipelines. It is
rock free sand.
 Concrete
Sand is dirt free
sand used in concrete.
| 
